RE510
Handheld Condenser
Microphone
KeyFeatures:
•
5/8" diameter self biased condenser capsule
offers the warmth of a larger capsule design
without sacrificing off-axis performance or
transient response
•
Low-frequency roll-off switch enables
tailoring of low-frequency response to meet
application requirements
•
Supercardioid polar pattern for superior
feedback rejection and acoustic isolation
•
Modern high-speed electronic design for
extremely low distortion, and outstanding
transient response
•
High current differential output stage can
drive long microphone cables without loss of
performance
•
Warm Grip handle for more comfortable feel
Technical Specifications:
•
Multistage pop filter eliminates breath pop
Generation Element: Self-Biased condenser
Frequency Response: 40 Hz to 20,000 Hz (see chart)
Polar Pattern: Supercardioid (see chart)
noises
General Description:
Sensitivity, Open Circuit 3.2mV/Pascal
Voltage, 1 kHz:
The RE510 is a professional quality hand-held condenser
microphone that was designed especially for vocalists. The
RE510 features a 5/8" diameter capsule, advanced
electronic design, and best of all, a sound that will enhance
any vocal performance.
Clipping Level, 1 kHz: +2 dBV
Maximum SPL, 1 kHz: 146 dB SPL (1% THD)
Self Noise: 22 dB SPL “A” weighted (0 dB=20
micropascals)
The high frequency response of the RE510 has been
designed to provide just the right amount of definition and
“air” without the stridency so common in other condenser
vocal microphones.
Dynamic Range 124 dB
(Maximum SPL to A
Weighted Noise Level):
Signal-to-Noise Ratio: 72 dB (@ 94 dB SPL)
Output Impedance, 1 kHz: 250 ohms
The low frequency response of the RE510 in combination
with the low frequency selector switch provides versatility
that was designed to be truly useful. With the low frequency
selector switch in the rolled off position, the low end of the
RE510 is tailored to compensate for proximity effect and
provides full, clean sound without muddiness. When
increased low-end is desired, placing the low frequency
selector switch in the flat position adds just enough warmth
to be noticeable, but not overbearing.
Power Requirements: Phantom Supply Requirement: 24 to
48 VDC
Polarity: Positive pressure on diaphragm
produces positive voltage on pin 2
relative to pin 3
Dimensions: Length = 7.15" (182 mm)
Diameter = 2.0" (51 mm)
Shank = 1.0" (25 mm)
Accessories Included: 326 Stand Adapter (Black)
Soft Zippered "Gig" Bag
The wide bandwidth, high SPL handling capability, and low
frequency selector switch of the RE510 also make it a
versatile instrument microphone for most any application.
Optional Accessories: 323S Stand Adapter
376 Charcoal Windscreen
379-1 Black Windscreen
379-2 Red Windscreen
The low frequency selector switch is securely located
beneath the ball screen and can’t be changed inadvertently.
Net Weight: 9.2 oz. (260 grams)
|