Addendum to the Matrox G200 Multi-
Monitor Series User Guide
This addendum provides Compaq-specific information for the Matrox G200 Multi-
Monitor Series graphics controller. Where noted, information in this addendum
supercedes respective sections in the Matrox G200 Multi-Monitor Series User
Guide.
NOTE: Your option kit does not support the Matrox TV Tuner. Please disregard all
references to the TV Tuner and any related connectors or applications in the Matrox G200
Multi-Monitor Series User Guide.
Kit Contents
The following items are included in your option kit:
■ Matrox G200 Multi-Monitor Series Graphics Controller
■ Two analog monitor cables
■ This Addendum
■ Limited Warranty
NOTE: To connect the Matrox G200 Multi-Monitor Series graphics controller to a digital
monitor with a Digital Visual Interface (DVI), you will need to purchase option kit 170840-
B21. This kit contains two adapter cables that support up to 4 digital monitors with DVI
connectors.
Addendum to the Matrox G200 Multi-Monitor Series User Guide -3
To download a ROMPaq:
1. From the left menu, select either Desktops or Workstations, depending on
your model. (ROMPaqs for the Deskpro Workstation models are located
under Workstations.)
2. Click on the appropriate language (English is default).
3. Select your specific Family and Model.
4. Under Operating System, select ROMPaqs and System Software.
5. Select and install the latest ROMPaq.
Installing the Software
IMPORTANT: You must install the drivers and utilities to take advantage of 3D
performance capabilities. Drivers are located on the Matrox G200 MMS Graphics CD
To install the drivers:
1. Insert the Matrox G200 MMS Graphics CD. The CD will auto-start.
2. Follow the prompts on the screen to install drivers.
NOTE: Refer to the user guide located on the Matrox G200 MMS Graphics CD for
additional information.
Hardware Installation
For hardware installation procedures, refer to the user guide on the Matrox G200
MMS Graphics CD.
Procedures for installation PCI expansion boards (i.e. graphics controllers) are also
provided in the documentation included with your computer. Please refer to this
documentation for recommended hardware configurations as some computers may
have restrictions on the location of the graphics controller, i.e. a particular PCI slot.
NOTE: To connect the Matrox G200 Multi-Monitor Series graphics controller to a digital
monitor with a Digital Visual Interface (DVI), you will need to purchase option kit 170840-
B21. This kit contains two adapter cables that support up to 4 digital monitors with DVI
connectors.
Addendum to the Matrox G200 Multi-Monitor Series User Guide-4
Limited Warranty
NOTE: The following information supercedes the respective section in the user guide.
Your Matrox G200 Multi-Monitor Series graphics controller is covered under the
Compaq warranty included with the option kit. This warranty replaces the limited
warranty offered by Matrox.
Technical Support
NOTE: The following information supercedes the respective section in the user guide.
In North America, call the Compaq Technical Phone Support Center at
1-800-OK-COMPAQ. This service is available 24 hours a day, 7 days a week.
Outside North America, call the nearest Compaq Technical Support Phone Center.
Telephone numbers for world wide Technical Support Centers can be found in the
warranty card that shipped with your product or on the Compaq website. Access
NOTE: For continuous quality improvement, calls may be recorded or monitored.
The Compaq website has information on this product as well as the latest drivers
and Flash ROM images. You can access the Compaq website by logging on to the
© 2000 Compaq Computer Corporation. Printed in the U.S.A. Compaq is
registered in the U.S. Patent and Trademark Office. Product names mentioned
herein may be trademarks and/or registered trademarks of their respective
companies. First Edition (January 2000).
173382-001
|