CD PLAYER
DUALALARMDIGITALCLOCKRADIO
MODEL CDR-1902
OPERATING INSTRUCTIONS
DUAL ALARMS - PERFECT FOR WEEKDAYS & WEEKENDS
PLAYS MUSIC COMPACT DISCS
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT
RECEIVES AM/FM BROADCASTS
WAKE UP TO CD, RADIO OR BUZZER
EASY TO SET CLOCK
BATTERY BACK-UP (9V BATTERY NOT INCLUDED)
•
•
•
•
•
•
•
PLEASE READ CAREFULLY BEFORE USE
IB-CDR1902(TA)-WM-E-090902
ADDITIONAL SAFETY INSTRUCTIONS
1. Power Sources - The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids
are not spilled into the enclosure through openings.
4. Servicing - The user should not attempt to service the appliance beyond that described in the operating
instructions. All other servicing should be referred to qualified service personnel.
5. Do not connect FM antenna wire to any outdoor antenna.
Do not apply oil or petroleum products or solvents to any part of this set.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
This compact disc player is classified as CLASS 1 LASER PRODUCT as stated on the
bottom of the set.
2
IB-CDR1902(TA)-WM-E-090902
1. Setting the Clock
TIME BUTTON
CLOCK/CD
DISPLAY
HOUR BUTTON
MINUTE BUTTON
Connect the AC power cord into a live wall outlet.
1
If the plug of the AC power cord does not
match your outlet, do not force it.
Reverse it and try again. This plug is
polarized and only fits one way into the
wall outlet.
Clock display will show “12:00 ”.
Hold the TIME button down,
and press the HOUR button,
until the right hour time shows
in the display.
2
3
PM indication lights up
for PM time.
Hold the TIME button down,
and press the MINUTE
button until the right minute
time shows in the display.
Example: 10:26 p.m.
Refer to Page 10 Part 8. Setting the Alarm Times for setting alarm time.
3
IB-CDR1902(TA)-WM-E-090902
2. Playing a CD
CD DOOR
OPEN button
POWER
button
CD DISPLAY
button
CLOCK/CD
DISPLAY
FUNCTION switch
(on the left side)
CD PLAY button
Connect the AC power cord (see Setting the Clock).
Press the POWER
button to turn on the
power, make sure the
POWER lamp is on.
Slide the FUNCTION
switch to CD position.
1
Press the CD DOOR
OPEN button to open the
CD Door and place the CD
in the CD compartment.
The label side of the CD
should face upward.
2
3
4
Close the CD DOOR by
pushing it down at the right
corner. The display will show
the total track number of the
disc for 5 seconds, then go
back to clock time display.
total track number
POWER
lamp
of the disc
Press the CD PLAY button. The
player plays all the tracks once.
Press the CD DISPLAY button,
the display will show the track
number of current play.
CD Track
number
During CD play, the display still shows CLOCK time, press CD DISPLAY
button if you want CD display.
4
IB-CDR1902(TA)-WM-E-090902
3. More about CD operation
Use these buttons for additional operations
CD DOOR
OPEN button
POWER
button
POWER
lamp
VOLUME
CONTROL
CD Track
Tip
When CD play is
paused, the CD
track number will
flash and no music
will play.
To
Press or Adjust
Adjust the volume
Volume Control
STOP
Stop playback
To resume play,
press the PAUSE
button again, CD
track number will
stop flashing and
music will play.
Pause playback
PLAY/PAUSE
CD track number will flash
during pause. Press again
to resume play after pause.
SKIP/SEARCH
FORWARD
Go to the next track
SKIP/SEARCH
BACKWARD
Go back to the previous
track
or
while playing,
Locate a point in a song
press and hold down until
you find the point.
CD DOOR OPEN button
Remove the CD
(press
first).
Press the POWER button
to turn off the power, the
POWER lamp will be off.
Turn off the CD player
5
IB-CDR1902(TA)-WM-E-090902
4. Playing CD tracks repeatedly (Repeat Play)
POWER
button
REPEAT
lamp
FUNCTION switch
(on the left side)
REPEAT button
1. Press the POWER button to turn on the power and slide the FUNCTION switch to
CD position.
2. Press
(PLAY button).
3. Press the CD REPEAT button.
To repeat
Press (during play)
Repeat Lamp
Flashing
a single track (song)
Press the REPEAT button once
Press the REPEAT button twice
all the tracks (all songs)
Steady on
4. You may select the individual track to repeat by pressing
or
.
To cancel Repeat Play
Press the REPEAT button until the REPEAT lamp is off.
6
IB-CDR1902(TA)-WM-E-090902
5. Playing CD in programmed order
You can make a program of up to 20 tracks in the order you want them to be played.
PROGRAM
lamp
PROGRAM
button
1. Press the POWER button to turn on the power
and slide the FUNCTION switch to CD position.
Make sure the CD is stopped.
2. Press the PROGRAM button. The letters
“P01” will show and the PROGRAM lamp will
flash.
3. Press
or
to select the tracks you want
to program in the order you want.
4. Press the PROGRAM button to confirm. The
letters “P02” will show.
5. Repeat steps 3 and 4. You can program up to
20 tracks.
6. Press
to start programmed play. The
PROGRAM lamp will show steadily on the
display.
To change the current program
Just create a new program following the programming procedure.
To cancel Programmed Play
Press the STOP button to stop programmed play. Press the STOP button again after
pressing the PROGRAM button or press the CD DOOR OPEN button to open the CD
door, and the PROGRAM lamp goes off.
7
IB-CDR1902(TA)-WM-E-090902
6. Listening to the radio
RIGHT SIDE VIEW
LEFT SIDE VIEW
FUNCTION
SWITCH
VOLUME
CONTROL
TUNING
CONTROL
BAND
SWITCH
Connect the supplied AC power cord (see Setting the Clock).
Press the POWER button to
ON and slide the FUNCTION
switch to RADIO position.
1
2
Slide the BAND switch to the proper
band position that you want.
Tune into the station you prefer using
the TUNING CONTROL. Adjust for the
clearest sound.
3
4
Adjust the VOLUME CONTROL for
desired loudness.
Press the POWER button to turn off the
power and the Radio, the POWER lamp
will go off.
5
8
IB-CDR1902(TA)-WM-E-090902
7. More about radio operation
PHONES jack
FM ANTENNA
BATTERY COMPARTMENT
(at the bottom of the set)
To improve broadcast reception
Fully stretch out the FM ANTENNA for better FM reception.
Reorient the player itself for better AM reception.
Or locate the set near a window.
To listen without disturbing others
Connect your headphones (optional - not included) into the PHONES jack at the back
of the set. The speaker will automatically be silenced. Remember to unplug the
headphones if you want the set to wake you up in the morning.
To use battery backup
Install a 9V battery for Clock backup, so that if your home power is momentarily off, you
will not have to set up the time & alarm settings.
Note: The display will not show the time but the time will be kept in memory and will re-
appear when power is restored.
9
IB-CDR1902(TA)-WM-E-090902
8. Setting the Alarm Time
This set has dual alarms. You may set ALARM 1 to wake you at a certain time,
or ALARM 2 to wake you at a different time, or ALARM 1+2 - both alarms will
sound at the times you set.
This feature is useful for a husband & wife waking up at different times or a single
person who likes to wake up at different times during weekdays or holidays.
To set ALARM 1, slide the ALARM SET switch to position 1,
the ALARM 1 lamp will turn on.
To set ALARM 2, slide the ALARM SET switch to position 2,
the ALARM 2 lamp will turn on.
RIGHT SIDE VIEW
FRONT SIDE VIEW
ALARM
ALARM 1
lamp
ALARM 2
lamp
MINUTE HOUR
ALARM SET switch
Hold the ALARM button.
1
2
Press the HOUR button to select correct hour
time. Release the HOUR button but continue to
press the ALARM button.
Press the MINUTE button for correct minute.
3
4
Release the ALARM button, the clock display
will show the normal time of day.
NOTE 1: The alarm times can not be set when the ALARM SET button is switched
to OFF or ALARM 1+2 position.
NOTE 2: If you want to be waked up in the morning, the PM lamp should be off on
alarm time (when pressing ALARM button). To change PM to AM time,
advance time 12 hours.
NOTE 3: To wake to ALARM 1 time, slide ALARM SET switch to position 1.
To wake to ALARM 2 time, slide ALARM SET switch to position 2.
To wake to both times, slide ALARM SET switch to position 1+2.
10
IB-CDR1902(TA)-WM-E-090902
9. Waking up to alarm or music
1. Waking up to alarm
1.Set the alarm time as previously instructed
and slide the ALARM SET switch to ALARM
1, ALARM 2 or ALARM 1+2, the proper
ALARM lamp will be on.
2.Set the FUNCTION switch to BUZZER
position.
Alarm buzzer will sound at the set alarm time.
2. Waking up to CD
1. Set the alarm time as previously instructed
and slide the ALARM SET switch to ALARM
1, ALARM 2 or ALARM 1+2, the proper
ALARM lamp will be on.
2. Set the FUNCTION switch to CD
position.
3. Make sure there is a CD disc loaded in
the compartment and POWER lamp is
off.
The CD Disc will start playing from the first track at
the set alarm time.
3. Waking up to radio
1. Refer to Listen to the radio for radio
operation instructions. Select the desired
AM or FM band using the BAND switch
and TUNING knob.
2. Set the alarm time as previously instructed
and slide the ALARM SET button to ALARM
1, ALARM 2 or ALARM 1+2, the proper
ALARM lamp will be on.
3. Set the FUNCTION switch to RADIO
position.
4. Press the POWER button to turn off the
power, make sure the POWER lamp is off.
The radio will start playing at the set alarm time.
11
IB-CDR1902(TA)-WM-E-090902
10. Snooze and Sleep functions
When alarm or music comes on
1. To sleep extra 6 minutes
Just press the SNOOZE button, the alarm or music
will stop and come on after 6 minutes.
2. To stop the alarm or music
Just press the ALARM OFF (POWER) button, the
alarm or music will stop and come on next day.
Going to Sleep with CD music
1. Follow steps 1-4 of Playing a CD on Page 4 to
start the CD play.
2. Press the SLEEP button,the display will show two
dashes “--”, and the SLEEP lamp flashes in the
display.
Press the SLEEP Button to select the desired
playing time (90 minutes, 60 minutes or 30
minutes).
3. The music will play for the time you selected, and
the SLEEP lamp will show on the display.
4. The CD will stop automatically after the selected
playing time, and the SLEEP lamp will be off.
5. To shut off the music before the time is up, press
the POWER button.
Going to Sleep with RADIO
1. Follow steps 1-4 of Listening to the Radio on
Page 8 to start the RADIO play.
2. Press the SLEEP button,the display will show two
dashes “--”, and the SLEEP lamp flashes in the
display.
Press the SLEEP Button repeatedly to select the
desired playing time (90 minutes, 60 minutes or
30 minutes).
3. The music will play for the time you selected, and
the SLEEP lamp will show on the display.
4. The RADIO will stop automatically after the
selected playing time, and the SLEEP lamp will be
off.
5. To shut off the music before the time is up, press
the POWER button.
12
IB-CDR1902(TA)-WM-E-090902
Precautions
On safety
On power sources
As the laser beam used in the CD
player section is harmful to the eyes,
do not attempt to disassemble the
casing. Refer servicing to qualified
personnel only.
For battery backup, you may use a 9V
•
•
battery (optional), so that you will not
have to re-set the clock every time you
disconnect the power.
The nameplate indicating operating
voltage, power consumption, etc. is
located at the bottom of the set.
•
Should any solid object or liquid fall into
the player, unplug the player, and have
it checked by qualified personnel
before operating it any further.
•
On operation
If the player is brought directly from a
•
On placement
cold to a warm location, or is placed in
a very damp room, moisture may
condense on the lens inside the CD
player section. Should this occur, the
player will not operate properly. In this
case, remove the CD and wait about
an hour for the moisture to evaporate.
Do not leave the player in a location
•
near heat source, or in a place subject
to direct sunlight, excessive dust or
mechanical shock or vibration.
Do not place the player on an inclined
or unstable place.
•
This CD player is designed to be played
Do not place anything within 1 inch of
•
•
on a stable no vibration position. If you
bump the set during CD play, the music
will stop or skip for a few seconds. This
is normal for this type of player.
the back of the cabinet. The ventilation
holes must be unobstructed for the
player to operate properly and prolong
the life of its components.
If you have any questions or problems
concerning your player, please contact
our customer service department.
Since a strong magnet is used for the
•
•
speakers, keep personal credit cards
using magnetic coding or spring-
wound watches away from the player
to prevent possible damage from the
magnet.
13
IB-CDR1902(TA)-WM-E-090902
Precautions (continued)
Cleaning the lens
Notes on CDs
If the lens becomes dirty, it may cause a
skipping of sound during CD operation.
Clean with a commercially available lens
cleaner blower or a cotton swab.
Before playing, clean the CD with a
cleaning cloth. Wipe the CD from the
center out.
•
Do not use solvents such as benzene,
•
•
thinner,
commercially
available
cleaners or anti-static spray intended
for vinyl LPs.
Do not expose the CD to direct
sunlight or heat sources such as hot
air ducts, nor leave it in a car parked
in direct sunlight as there can be a
considerable rise in temperature inside
the car.
Cleaning the cabinet
Clean the cabinet, panel and controls with
a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder, or solvent,
such as alcohol or benzene.
Do not stick paper or sticker on the
CD, nor scratch the surface of the CD.
After playing, store the CD in its case.
If there is a scratch, dirt or fingerprints
on the CD, it may cause tracking error.
•
•
14
IB-CDR1902(TA)-WM-E-090902
Trouble Shooting
Remedy
Problem
Connect the AC power cord to a wall
outlet securely. Make sure that outlet
has power.
•
The power is not on.
Make sure the FUNCTION switch is at the
right position as you want.
•
There is no sound.
Adjust the volume.
•
•
Unplug the headphones when listening
through speakers.
AM or PM not set correctly. Is alarm time
set in AM range (PM lamp off)?
•
•
•
•
Alarm does not come on in the
morning.
ALARM SET switch is in OFF position. Are
the ALARM INDICATORS off?
ALARM SET switch is not in the proper position.
“
” appears in the display
Insert the CD with the label side up.
even when a CD is in place.
Make sure that the CD compartment is
closed.
•
CD play is paused, press
again.
•
•
Take out the CD and leave the CD door
open for about an hour to dry moisture
condensation.
CD does not play.
Make sure the FUNCTION switch is at CD
position.
•
Clean the CD, or replace it if the CD is badly
damaged.
•
•
The sound drops out.
Place the player in a location free from
vibration.
It is normal since the radio uses less power
than the CD player.
CD does not play while radio
may continue to play.
•
Fully stretch out the FM antenna to improve
FM reception.
•
•
The sound is weak or has poor
quality.
Bring the set near a window, or rotate the
set for AM reception.
15
IB-CDR1902(TA)-WM-E-090902
Specification
GENERAL DESCRIPTION
Power source:
AC 120V, 60Hz 10Watts
DC 9V (optional - for clock backup)
Speakers:
3” 8 ohm
Output power:
Dimensions:
1.5W
Width: 10”
Depth: 7”
Height: 4 1/2”
Weight: 7 LBs (without battery)
CD SECTION
Plays disc type:
Laser wavelength:
Tracking method:
Any compact discs bearing this logo
760 - 800 NM
3 - spot error detection 3.86 mm lens
Frequency response: 50 Hz - 15 kHz (+1/-2dB)
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs).
This set will not play CDRW encoded discs.
RADIO SECTION
Frequency range:
FM: 88 - 108 MHz
AM: 530 - 1700 kHz
LENOXX reserves the right to make design and specification changes for product
improvement.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED
UNDER THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR LACQUER
FINISH.
For customer service
Dial 1-800-315-5885
(MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)
or Visit Our Website: http://www.lenoxx.com
© 2002 LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
MADE & PRINTED IN CHINA
16
IB-CDR1902(TA)-WM-E-090902
|