60 SECOND ESP PLUSTM
ELECTRONIC SHOCK PROTECTION
PROGRAMMABLE COMPACT DISC PLAYER
WITH CAR ADAPTOR KIT AND REMOTE CONTROL
MODEL CD-89
OPERATING INSTRUCTIONS
INCLUDES CD FEATURE REMOTE CONTROL
PLAYS MUSIC COMPACT DISCS
BASS BOOST SYSTEM
6 DIGIT LCD VISUAL DISPLAY
•
•
•
•
TRACK REPEAT & DISC REPEAT
•
60 SECOND ESP (ELECTRONIC SKIP PROTECTION) PLUSTM SYSTEM
•
CAR POWER CORD AND CASSETTE ADAPTOR INCLUDED
DELUXE STEREO HEADPHONES INCLUDED
USES 2 SIZE “AA” BATTERIES (NOT INCLUDED)
LINE OUT JACK - CONNECTS TO YOUR STEREO SYSTEM
•
•
•
•
PLEASE READ CAREFULLY BEFORE USE
IB-CD89(21B-60C9)-WM-E-010603
LOCATION OF CONTROLS
6
5
4
3
7
8
9
2
10
11
12
13
1
14
15
1. CD DOOR OPEN BUTTON (slide to open)
2. CD DOOR
3. PROGRAM BUTTON (for programmed play)
4. BACKWARD SKIP/SEARCH BUTTON
5. STOP AND POWER OFF BUTTON
6. LCD DISPLAY
7. PLAY/PAUSE & POWER ON BUTTON
8. FORWARD SKIP/SEARCH BUTTON
9. REPEAT BUTTON
10. AC ADAPTOR JACK (AC ADAPTOR not included)
11. BASS BOOST SWITCH
12. LINE OUT JACK (for home stereo connection)
13. VOLUME CONTROL
14. PHONES/REMOTE JACK (headphones jack, also for REMOTE CONTROL connection)
15. BATTERY DOOR
2
IB-CD89(21B-60C9)-WM-E-010603
POWER SOURCES
Power your CD player by connecting an optional AC ADAPTOR or by inserting 2 size
“AA” fresh alkaline batteries, or using the provided Cigarette Lighter Adaptor.
NOTE: Before you buy an optional AC Adaptor, please note the only AC ADAPTOR
suitable for this player is DC 4.5V 600mA with polarity
, others may
damage your player. Please check voltage and current (mA) before buying an
AC ADAPTOR.
1. Using with Batteries
Insert 2 size “AA” alkaline batteries
according to the + and - markings in
the BATTERY COMPARTMENT.
TIPS ON BATTERY USE
Reversing polarities will damage the batteries and possibly your set. Be sure to
follow polarity ( + and - ) as indicated.
•
Do not mix different types together (Alkaline, Carbon-Zinc, Nickel-Cadmium etc.),
or old batteries with new ones.
•
When not in use for an extended period of time, or while internal batteries will not
be used, remove them to prevent possible acid leakage or corrosion resulting in
damage to your player.
•
When the batteries have become discharged, they must be disposed of in a safe
manner that complies with all applicable laws.
•
Installation of batteries should only be done by an adult (for safety).
•
ALKALINE BATTERY LIFE
Bear in mind that battery life expectancy is based upon volume and bass listening
levels.
Maximum battery power consumption happens at maximum settings. Typical life
for 2 size “AA” alkaline batteries is above 8 hours of continuous use for CD play.
WHEN
SHOWS IN THE DISPLAY
While CD playing, if the alkaline batteries are weak and discharged, this symbol
” shows or flashes in the display, then the power automatically turns off. If this
“
occurs, replace the alkaline batteries (also if the display does not show anything,
the batteries are dead).
NOTE: You may use rechargeable batteries on this set. However, because
rechargeable batteries generally have lower voltage (1.2 volts instead of
1.5 volts). Your playing time will be much less than normal fresh alkaline
batteries.
3
IB-CD89(21B-60C9)-WM-E-010603
2. Using Cigarette Lighter Adaptor
Use the cigarette lighter adaptor to supply
power to your player and conserve battery life
when using the CD player in a car (no batteries
are needed).
Cigarette Lighter
Indicator
Plug the adaptor into the car cigarette
lighter. Insert firmly, and the cigarette lighter
indicator will light up.
•
Plug the other end into the DC 4.5V jack on
the right rear of the set.
•
If there is no power, your fuse may have
•
blown. To change fuse on cigarette lighter
adaptor, unscrew the tip. Replace only with
same 1A 250V fuse.
CAUTION:
Use this set only with the supplied cigarette lighter adaptor. Use with other cigarette
lighter adaptors could damage the set.
•
When the inside of the cigarette lighter socket is dirty with ashes, the plug section
may become hot due to poor contact. Be sure to clean your car cigarette lighter
socket before use.
•
After use, disconnect the cigarette lighter adaptor plugs from both the set and the
cigarette lighter socket.
The cigarette lighter adaptor may cause interference with reception to the car
radio. If this happens, disconnect the cigarette lighter adaptor from the cigarette
lighter socket.
•
•
Do not leave the cigarette lighter adaptor plugged in without your car’s motor
running, your car’s battery may drain in some models of cars that supply power
to the cigarette lighter adaptor even with the car’s keys removed.
•
4
IB-CD89(21B-60C9)-WM-E-010603
CASSETTE ADAPTOR
The car cassette adaptor allows you to use your CD player with your car stereo
cassette system.
1. Insert the car cassette adaptor in the same direction
as you would insert an audio cassette tape, with the
side marked THIS SIDE UP facing upwards.
2. If the car cassette adaptor cord is on the wrong side
of the tape, reposition the cord by following the
instructions below.
3. Insert the car cassette adaptor stereo plug into the
LINE OUT jack on the right side of the CD player.
4. Turn on the cassette player. Press the PLAY button
on the cassette player.
TO LINE OUT JACK
5. Press the PLAY button on the CD player.
6. Adjust the VOLUME control on your cassette player.
7. When done, leave the cassette player on and first
eject the adaptor, then turn off cassette player.
Reposition the cord
The cord should extend out from the cassette player
when the cassette is inserted (direction depending on
your tape player).
Fig. 1
Fig. 2
1. To reposition the cord, remove the top plate by
removing 2 screws with a dime (see Fig. 1).
2. Reposition the cord so that it comes out from other
positions (see Fig. 2).
Remove two
large screws
with a dime or
screwdriver
Move cord to
desired position
(three
cord
positions)
3. Replace the cover and the screws.
NOTE: The car cassette adaptor has the play head on one side only. If the cassette
adaptor keeps ejecting out, or the sound is weak, press the REVERSE button on
your cassette player to change direction or reverse the adaptor.
CONNECTING TO HOME STEREO SYSTEMS
The LINE OUT jack is made to accept a stereo mini plug (3.5mm). Simply connect the
cable’s mini plug to the LINE OUT jack on your player, and the other appropriate end
usually RCA JACKS to the CD/AUX INPUTS of your home stereo.
YOUR CD PLAYER
YOUR STEREO
SYSTEM
TO LINE OUT JACK
OPTIONAL CABLE (3.5mm) TO AUX IN JACKS
TO RCA JACKS
5
IB-CD89(21B-60C9)-WM-E-010603
REMOTE CONTROL
You can control the CD PLAYER with the provided remote control (including the functions
of PLAY/PAUSE AND POWER ON, STOP/OFF, SKIP/SEARCH and VOLUME CONTROL).
7
1. PLAY/PAUSE & POWER ON
2. STOP/OFF
3. SKIP/SEARCH BACKWARD
4. SKIP/SEARCH FORWARD
6
1
5. VOLUME CONTROL
6. BELT CLIP (at back)
7. HEADPHONES JACK
5
4
2
3
NOTE: You can only adjust the volume
by rotating the VOLUME CON-
TROL when you play the set with
the remote control.
PLAYING WITH THE REMOTE CONTROL
The PHONES/REMOTE jack is made to play your set with the included REMOTE
CONTROL. Simply connect the REMOTE CONTROL’s plug to the PHONES/REMOTE
jack on right side of your player, and plug the STEREO HEADPHONES’s plug into the
PHONES jack on the top of the REMOTE CONTROL.
CD PLAYER
STEREO
HEADPHONES
REMOTE CONTROL
TO PHONES/REMOTE JACK
TO PHONES JACK
(on top of the REMOTE CONTROL)
6
IB-CD89(21B-60C9)-WM-E-010603
CD PLAYING
1 Load the Disc.
Push
here
Disc
Label side up
Slide right to open
2 Connect the Headphones.
Stereo Headphones
To PHONES jack
3 Press the PLAY/PAUSE button.
PLAY/PAUSE
button
TOTAL PLAYING
TIME OF THE CD
TOTAL TRACKS
TRACK NUMBER
CURRENTLY
PLAYING
ELAPSED PLAYING
TIME OF THE
CURRENT TRACK
VOLUME CONTROL
NOTE: The ESP PLUSTM function will turn on automatically when the PLAY/PAUSE
button is pressed.
4 Adjust the Volume.
7
IB-CD89(21B-60C9)-WM-E-010603
OTHER OPERATIONS
Operation
Press
Display window shows
PLAY/PAUSE
button
To pause play
TRACK NUMBER
CURRENTLY PLAYING
PLAYING TIME
FLASHES
PLAY/PAUSE
button
To release pause and resume
play
TRACK NUMBER
CURRENTLY PLAYING
PLAYING TIME
ADVANCES
To stop
STOP button
TOTAL TRACKS TOTAL PLAYING TIME
STOP button once and wait 30 seconds, or press
STOP button twice.
To turn off the power
SKIP(SEARCH) FORWARD button
repeatedly).
once (or
once (or
To skip to the next track(s)
SKIP(SEARCH) BACKWARD button
repeatedly).
To skip to the previous track(s)
Keep SKIP(SEARCH) FORWARD button
depressed and release when the desired music
section of the disc is found.
To go ahead at high speed
(search)
Keep SKIP(SEARCH) BACKWARD button
depressed and release when the desired music
section of the disc is found.
To go back at high speed
(search).
BASS BOOST switch
This switch enhances the low frequency
(bass) sounds at low listening levels.
Switch the BASS BOOST switch ON or
OFF to suit your taste.
BASS BOOST switch
8
IB-CD89(21B-60C9)-WM-E-010603
REPEAT, INTRO AND RANDOM PLAY
You may have repeat, intro or random play using the REPEAT button. Press the REPEAT
button several times, and the display will show the followings in turn:
REPEAT ONE --> REPEAT ALL --> INTRO --> RND --> NORMAL PLAY
Single Track Repeat
Plays one song over and over till you press STOP.
X 1
During play, select the song you want to repeat with
REPEAT
either of the SKIP/SEARCH buttons (
or
), then
press the REPEAT button once, the symbol REPEAT
REPEAT ONE
ONE will appear in the display.
The song currently playing will repeat over and over,
until you press STOP.
All Tracks Repeat
Repeats all songs in order, till you press STOP.
X 2
REPEAT
During play, press the REPEAT button twice, the symbol
REPEAT ALL will show in the display.
REPEAT
ALL
All songs will keep playing in sequence 1, 2, 3, etc., and
when finished, will start all over again until you press the
STOP.
Intro Play
This plays the first 10 seconds of songs in sequential
order.
X 3
1. During play, press the REPEAT button three times,
the word INTRO will flash in the display.
2. Press the PLAY button, the word INTRO will stop
flashing and the first 10 seconds of each song on the
CD will play in sequential order.
REPEAT
INTRO
3. When you find a song you like, press the PLAY button
again, the symbol INTRO will disappear from the
display, normal play will be resumed, that song (and
the following songs) will play NORMALLY.
Random Play
This plays the songs on the disc in a random order.
1. During play, press REPEAT button four times the word
RND will flash.
X 4
REPEAT
2. Press the PLAY button, this will play all of the songs
in random order selected by the CD player. The word
RND will stop flashing.
RND
3. Press the SKIP/SEARCH button
next random song.
to skip to the
9
IB-CD89(21B-60C9)-WM-E-010603
PROGRAMMED PLAY
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Programming Example:
Program Number
1
3
etc.
etc.
2
5
3
8
4
1
5
2
6
4
7
1
8
1
Track Number (song number)
During programming, the word PROG flashes in the display. To program songs to play
in your preferred order, follow steps below:
1.Press the PROGRAM button.
3.Press the PROGRAM button to confirm.
Track 3 is now programmed.
Program number 2 will now show in the
display, ready for your next selection of
track.
P
PROGRAM
The word PROG and “
” will flash in the
display.
4.Repeat steps 2 and 3 to program other
tracks till you finish (up to 20
selections).
5.After programming is finished, press the
PLAY button to begin programmed play.
The word PROG changes to be steady
on in the display, and music begins to
play in the order you programmed.
Program number
2.Press the SKIP/SEARCH button (
or
) to select track number 3 (example).
PROG and track number “03” will flash in
the display.
PLAY/PAUSE
NOTE:
- The player will stop automatically after
all programmed tracks have been
played.
- To quit programmed play, press the
STOP button once. Then you may press
the PLAY button to re-start normal play.
SKIP
Your programmed memory will be
lost:
When the alkaline batteries are
exhausted or removed, or the optional
AC ADAPTOR is disconnected.
•
When the power is shut off.
•
Track number
10
IB-CD89(21B-60C9)-WM-E-010603
60 SECOND ESP PLUSTM ANTI-SKIP SYSTEM
This set is designed with the latest 60 second ESP PLUSTM (Electronic Shock Protection)
- which allows virtually unlimited gentle skip protection above the normal 60 second
shock protection.
The 60 second ESP PLUSTM function prevents the sound from skipping by using a
buffer memory that stores music data. The new 60 second ESP PLUSTM system can
store more music than normal 60 second anti-skip systems.
This new design allows gentle swaying of the set (as in walking) without music skipping.
This function (CD ESP PLUSTM) may not work during heavy jogging.
The 60 second ESP PLUSTM function will turn on automatically when the PLAY/PAUSE
button is pressed.
When the PLAY/PAUSE button is pressed, the “
” (memory
basket) indicator will appear in the display, the digital data (music)
is stored in the “read-ahead” memory buffer before it is decoded
and played.
EMPTY MEMORY
FULL MEMORY
The “
” mark changes to the “
” mark, indicating that the
memory buffer (basket) is full.
When the set is subject to a shock or a bump during play, the
data stored in memory continues to be decoded and played.
This gives the pickup time to stabilize and continue reading
new music. As the data is used from memory, the indicator
•
•
SOME MEMORY USED
changes from “
original position, new data is stored in memory and the display
changes back to the “ ” mark.
” to “
”. Once the pickup returns to its
If the set is subject to repeated shocks and all the data stored
in memory is used up, the “ ” mark is displayed and the
sound will skip or stop for a brief period until the memory basket
has time to fill up again.
ALL MEMORY USED UP
NOTE:
- The music may stop if the player receives continuous shocking.
- You may hear noise or skipping if the CD is dirty or scratched.
- If you press PLAY/PAUSE, or SKIP (SEARCH) buttons, the
memory basket will empty itself temporarily.
11
IB-CD89(21B-60C9)-WM-E-010603
MAINTENANCE
Handling Compact Discs
Cleaning the lens
Dirty, scratched or warped discs may
•
A dirty lens will cause sound skipping. If
the lens is very dirty, the player may not
work. We suggest using a special cleaning
disk (not included) available in most music
and Hi-Fi stores. However, if you do not
have one, you may use a cotton swab
very slightly dampened with alcohol to
clean the lens.
cause skipping or noise.
Handle the disc only by the edges. To
keep clean, do not touch its surface.
•
Discs should be stored in their cases
after use to avoid scratches.
•
Do not expose discs to direct sunlight,
•
high humidity, high temperatures, or
dust, etc. Prolonged exposure to
extreme temperatures can warp the disc
(such as leaving the discs in your car
during summertime).
Cleaning the cabinet
Wipe with a soft cloth. If the cabinet is
very dirty, dampen (not dripping wet) the
cloth with a weak solution of soapy water,
and then wipe clean.
Do not stick or write anything on either
•
side of disc. Sharp writing instruments, or
the inks used in some felt-tip pens, may
damage its surface.
Cleaning the Discs
To remove the Disc
Fingerprints should be carefully wiped
•
Open the CD DOOR by sliding the DOOR
OPEN button, hold the disc by the edge
while slightly pressing on the center
spindle as illustrated, then lift it from the
edge to release and remove.
from the surface of disc with a soft cloth.
Unlike conventional records, compact
discs have no grooves to collect dust
and microscopic dirt, so gently wiping
them with a soft cloth should remove
most particles. Wipe in a straight
motion from the center to the edge.
NOTE:
Never use thinner, benzine, record
Always press STOP button and wait for
the disc to stop rotating before sliding the
DOOR OPEN button to remove the disc.
•
cleaner or antistatic spray on a compact
disc. Such chemicals can damage its
plastic surface.
12
IB-CD89(21B-60C9)-WM-E-010603
SAFETY PRECAUTIONS
Do not take the set apart. The laser beam used in the set may harm your eyes. Refer
servicing to qualified service personnel only.
Do not insert pins or coins, clips, or any objects inside the set.
This set is equipped with a safety device which automatically turns the laser beam off
when the CD DOOR is opened.
Do not drop the set or subject it to strong shocks. Doing so could result in damage.
Do not place the set in locations where the temperature is high, or in humid or dusty
locations, or locations with long heavy vibrations, or tilted surfaces.
The set’s cabinet may warp or the set may be damaged if it is placed in direct sunlight,
near heaters (where the temperature is 1400F/600C or higher) or in cars with the
windows closed. In the summer, the temperature may get as high as 2120F/1000C or
more.
Use the set within a temperature range of 410F/50C to 950F/350C.
Use ONLY the optional DC 4.5V AC ADAPTOR with polarity
, others may
damage your set. Disconnect the ADAPTOR from the wall outlet when the set is not to
be used for an extended period of time (3 days or more).
When cleaning your set, use a soft dry cloth. Do not use solvents or commercially
available cleaners, as they may damage or discolor the finish.
Do not wear headphones while operating a motor vehicle. This could create a traffic
hazard and is illegal in many areas. Do not use this set when bicycling or running.
The headphones supplied with your set provide superb stereo listening while allowing
you to hear some outside sounds when listening at normally low volume levels. Listening
at extremely high volume levels minimizes the intrusion of outside noise/sounds. In the
interest of safety, it is strongly advised against the use while engaging in activities
where the exclusion of external sounds (whistles, horns, sirens, traffic, etc.) could be
hazardous. Also loud volume can hurt your ears. If you notice that the sound has
become weak or distorted or if tracks do not change, this is an indication that your
batteries are weak. Replace both batteries at the same time (see Using with Batteries).
Your CD-89 is identified by a serial number located in the BATTERY COMPARTMENT.
Record this number in the space provided below.
Model CD-89 Serial No.
Date Purchased:
This manual contains detailed information on its safety and use. Please read it carefully
so that you may take full advantage of its many features, and ensure a safe reliable
operation. Keep this manual for future reference.
CONDENSATION
If cold water is poured into a glass, water droplets form on the outside of the glass. This is
called condensation. Condensation may occur on internal operating parts of the lens.
Condensation occurs:
When the set is brought from the cold outdoors into a warm room, or if it is in a cold
room to a room which is heated, or in the summer, if the set is moved from an air-
conditioned room or car to a hot or humid location.
Should condensation occur, the set may not operate properly. Open the CD DOOR
and wait for about 20 minutes (to allow the internal parts to adjust to the surrounding
temperature) before using the set.
13
IB-CD89(21B-60C9)-WM-E-010603
IMPORTANT REQUIREMENT BY THE FCC
Since the CD circuitry may cause interference to other radios nearby, switch this
set off when not in use or move it away from the affected radios.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesirable operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
•
•
•
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
•
SAFETY CERTIFICATION
This Compact Disc Player is made and tested to meet safety standards of the FCC
requirements and comply with safety performance of the U.S. Department of Health
and Human Services, and also with FDA Radiation Performance Standards 21 CFR
Subchapter J.
WARNING
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
•
•
California Proposition 65 Warning
This product contains chemicals known to the state of California to cause cancer,
and birth defects or other reproductive harm.
Wash Hands After Handling.
LASER SAFETY
THIS SET EMPLOYS AN OPTICAL LASER BEAM SYSTEM IN THE CD MECHANISM,
DESIGNED WITH BUILT-IN SAFEGUARDS. DO NOT ATTEMPT TO DISASSEMBLE.
EXPOSURE TO THIS INVISIBLE LASER LIGHT BEAM MAY BE HARMFUL TO HUMAN
EYES. THIS IS A CLASS-1 LASER PRODUCT. USE OF ADJUSTMENTS OTHER THAN
THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT BEAM
EXPOSURE. THIS COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR
REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL. THE LASER
MECHANISM IN THE SET CORRESPONDS TO THE STYLUS (NEEDLE) OF A RECORD
PLAYER. ALTHOUGH THIS PRODUCT USES A LASER PICK-UP LENS, IT IS
COMPLETELY SAFE WHEN OPERATED ACCORDING TO DIRECTIONS.
14
IB-CD89(21B-60C9)-WM-E-010603
TROUBLE SHOOTING GUIDE
Causes
Solutions
Symptoms
Replace both batteries with fresh
alkaline batteries. Battery life with
fresh batteries is above 8 hours for
continuous CD play (rechargeable
batteries have 1/2 of that life).
Batteries are weak (they
may test OK on tester but
they are weak for CD
operation).
Tracks do not
change or set
does not play
normally.
Dead or weak batteries.
Replace both batteries with fresh ones.
CD Player will not
turn on.
The optional AC ADAPTOR
not connected properly.
Check AC ADAPTOR connection at
AC outlet and the right side of the set.
Disc inserted incorrectly.
Defective compact disc.
CD DOOR not closed.
Re-insert disc with label side facing up.
Try another compact disc.
Close the door securely.
Disc will not play.
Take out the CD and leave the CD
Door open for about 20 minutes to
dry the moisture condensation.
Moisture has formed inside
the CD deck.
Re-insert headphone plug into
PHONES jack (not LINE OUT) on
the set or on the top of the REMOTE
CONTROL.
Increase the volume of the set or
the REMOTE CONTROL.
Headphone plug not
inserted properly.
No sound from
headphones.
VOLUME control set to
minimum.
Replace with fresh batteries or use
an optional AC ADAPTOR.
Weak batteries.
Try another compact disc.
Defective compact disc.
VOLUME control Headphones plugged into Plug headphones into PHONES jack.
LINE OUT jack.
(NOT THE LINE OUT JACK)
has no function.
Clean or replace the compact disc or
clean the lens.
The compact disc or lens is
dirty or CD is scratched.
Sound is skipping
or sound stops.
Strong vibrations.
Music is too loud.
BASS BOOST is ON.
Place the player on a stable level.
Lower the VOLUME control.
Slide BASS BOOST switch to OFF.
Sound is distorted.
Replace both batteries or use an
optional AC ADAPTOR.
Weak batteries.
Remove batteries and ADAPTOR.
Wait 15 seconds and re-insert. Make
sure batteries are fresh or the optional
ADAPTOR has power.
Buttons do not Electronic or static error
work.
caused circuitry to lock.
Press the REVERSE button on your
cassette player or reverse the
adaptor.
Car
Adaptor
from radio.
Cassette
ejects
Your car may have special
cassette player.
Insert Adaptor firmly and fully (make
sure socket is clean).
Cigarette Lighter
Adaptor has no
power or Cigarette
Lighter Indicator
does not light up.
Poor contact.
Fuse is blown.
Unscrew Adaptor tip and replace fuse
inside the Adaptor. Also check the
Car’s fuse.
15
IB-CD89(21B-60C9)-WM-E-010603
TECHNICAL SPECIFICATIONS
CD Player Section
Frequency response ..............................
50Hz-15kHz +1/-2dB
Sampling frequency ................................
D/A converter .........................................
Error correction method ..........................
Pickup ...................................................
44.1kHz
1-bit
CIRC
Optical 3-beam semiconductor laser
(780 nm wavelength)
Laser diode material GaAIAs
Laser output less than 44.6µW
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs).
This set will not play CD-RW encoded discs.
General
Maximum output (stereo headphones) .....
Power Supply
20mW + 20mW
AC adaptor ...........................................
DC .......................................................
120V/60Hz DC 4.5V Output (not included)
3V: Using 2 size “AA” batteries (not included)
Set Dimensions (approximate)
1
5
Width ...............................................
Depth ..............................................
Height ..............................................
5
5
/
/
”
”
8
8
1 ”
Weight (approximate) ........................... 9.5oz. (270g) (set only)
Because the products are subject to continuous improvement, LENOXX reserves the
right to modify product designs and specifications without notice and without incurring any
obligation.
16
IB-CD89(21B-60C9)-WM-E-010603
|