ST Front Brush Guard
Assembly Instructions
Treker ST Series
Manual No. 701-137M
Further Assistance
Before You Start
Your dealer wants you to be satisfied with your new ST
Front Brush Guard. If for any reason you do not
understand any part of this manual or are not satisfied
with the service received, the following actions are
suggested:
When you see this symbol, the subsequent
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!
!
1. Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.
IMPORTANT: Before you begin, read these
instructions and check to be sure all parts and tools
are accounted for. Please retain these installation
instructions for future reference and parts ordering
information.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3. For further assistance write to:
!
CAUTION
Your ST Front Brush Guard is exclusively designed for your
Land Pride ST Treker. Please read these installation
instructions and your ST Treker Operator’s Manual
thoroughly before beginning. Especially read information
relating to safety concerns. Also included in the Operator’s
Manual is important information on operation, adjustment,
troubleshooting, and maintenance for this attachment (some
manual sections do not apply to all accessories).
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
General Information
These assembly instructions apply to the following ST
Front Brush Guard Accessories listed below:
701-037A
ST Front Brush Guard
© Copyright 2007
Printed
06/20/07
1
|